Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high.
Please send your inquiry to Email: joy@dumanlaser.com
Item NO. :
DMC-200PPayment :
L/C D/A D/P T/T Western UnionProduct Origin :
ChinaShipping Port :
XiamenLead Time :
15 days200W 300W Hand-held Fiber Pulse Laser Cleaning Machine With Water Cooling
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high.
Under the same power conditions, the cleaning efficiency of pulsed laser is much higher than that of continuous laser. At the same time, pulsed laser can better control the heat input to prevent the substrate temperature from being too high or micro-melting.
Therefore, there are fundamental differences between the two in application scenarios. With high precision, it is necessary to strictly control the heating of the substrate, and the application scenarios that require the substrate to be non-destructive, such as molds, should choose a pulsed laser cleaning machine.
|
Application |
|||
|
Rust Removal |
Oxide Removal |
Molding Cleaning |
Surface Preparation |
|
Coatings Removal |
Weld Pre-treatment |
Gluing Pre-treatment |
Removal of Oil and Grease |
|
Paint Removal |
Surface Cleaning |
Stain Removal |
Surface Roughening |
|
Tool Cleaning |
Historic Restoration |
Selective Paint Removal |
Precise Cleaning |
Features
1) Non-contact cleaning
2) Precise cleaning, can realize selective cleaning with precise position and precise size.
3) No chemical cleaning fluid, no consumables, safe and environmentally friendly.
4) Easy to operate, just power on, and it can be hand-held or coordinated with a manipulator to realize automatic cleaning.
5) High cleaning efficiency, saving time.
6) The laser cleaning system is stable and hardly needs maintenance.
Technical parameter
|
Cleaning efficiency(m2 / h) |
5 |
|
Cooling mode |
water-cooling |
|
Scan width |
10-80MM |
|
Focal length |
210/160 Replaceable |
|
Power regulation range（%） |
10-100(gradient adjustable) |
|
Power consumption of the whole machine |
2500W（Including chiller） |
|
Size |
1100mm×700mm×1150mm |
|
Supply voltage |
single-phase 220V±10%、50/60Hz alternating current |
Samples
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
Laser Cleaning Machine is suitable for cleaning rust layers, thick paint layers, deep oil stains, rough surfaces and weld seams. It does not affect the surface of the substrate, and the efficiency is very high. Email: joy@dumanlaser.com
We are online 7*24 hours to answer all your questions
Scan the QR code below to get soon contact
Skype
.jpg)
English
русский
español
한국의
IPv6 network supported